Parking mode is a fancy term for any recording done while your engine is off and your car is parked. It will also free up a cigarette socket in your vehicle which can be left for use with a phone charger or other automotive accessory.
Parking mode is a fancy term for any recording done while your engine is off and your car is parked. It will also free up a cigarette socket in your vehicle which can be left for use with a phone charger or other automotive accessory. For parking mode recording, it always requires hardwiring cable connects your camera to your car’s battery through the fuse box.
VIOFO A129 Duo dash camera support three wires HK3 ACC hardwire kit cable.
Function of HK3, ACC detection and car battery protection
HK3 has four voltage options 11.8V, 12V, 12,2V, 12.4V. Also with the ACC detection feature, it support switch to parking mode automatically if the car engine off, and switch back to normal recording after car engine on. Please notice this auto switch between normal recording and parking mode recording only works if the cable is connected to the camera directly, not through the GPS mount.
Working with the VIOFO HK3 hardwire kit can realize ACC mode, which means a more sensitive detection for the start and stop of the car and the optimization of parking mode in a few seconds. Also, with the ACC detection feature, the dash camera supports the switch to parking mode automatically when the car engine off, and back to normal recording after the car engine on.
It also applies low-voltage cutoff to prevent the dash camera from draining the vehicle’s battery. The HK3 will cut off power supply after 90 seconds to 2 minutes to prevent the car battery voltage fluctuates for a short time.
HK2 VS HK3
Compared with HK2 hardwire kit, HK3 could have a more accurate and quicker starting automatically and HK3 does not need to exit parking mode manually. However, HK2 needs to leave the parking mode manually
Parking Mode Recording
The A129 dash cam support three parking recording modes, auto event detection, time lapse and low bitrate recording.
Auto event detection
The camera will record for 1 minute while a moving object is detected while parked and stop recording if no new movement.
Auto event detection is a proper parking mode for drivers only want videos for detected motion and event.
Time Lapse Recording
Time lapse records a video at low frames like 1/2/3/5/10/15 fps. It keeps recording continuously, this avoids any failures which can happen with motion detection especially under low light. The 1fps means the dash camera will take 1 frame per second. Compared with 15fps in auto event detection, it reduces the amount of footage at the same time to realize smaller file size and longer recording time since the footage will not be overwritten in a short period of time.
The downside is that you may miss details like license plates, as well no audio is captured which could identify people who may have damaged your vehicle.
Time-lapse mode is an ideal choice for people who park the car in a busy area that motion detection may always be triggered, especially at night.
Videos recorded with time-lapse mode is voiceless.
Low Bitrate Recording
This mode record video in low bitrate 4MB/s for both front and rear. So, the recorded video will play at a normal speed with a lower image quality compared with normal recording. It keeps recording continuously in mini file size, reduce a little video quality will help to save card space and can record longer time in parking mode.
Low bitrate recording is a great choice for people who park the car in a busy area that motion detection may always be triggered, especially in good lighting conditions.